SP63 Injector Service

SPEED PERF6RMANC3 Part #: SP63-INJSVC
Service type
Injector Cores
Oring Kit
    Sale price $25.00Regular price
    Regular price $25.00

    Need help matching this to your build?

    Talk to the SPEED PERF6RMANC3 team

     

    ATTN: Before purchasing please make sure injectors are ready to be sent in. Injectors must be sent in within a month of purchase date, if a month is exceeded order will be automatically cancelled. The amount of the purchase will then be credited back to your account as store credit that may be used at any time. Thank you!

    NOTE FOR MAZDA INJECTORS: Injector seals are NOT reusable - Do NOT send injectors with seals as they will be disposed by us!

    NOTE FOR ALL: Do not send injectors w/ O rings!

    ____________________________________________________________________________

     Product Video:

    ____________________________________________________________________________ 

     Gasoline direct injection requires high pressure testing to truly diagnose operation faults. Speed Perf6rmanc3 once again provides the only complete testing solution in the market today, with the Revolutionary GDU.4r, GDU.2r and GD1r Test benches.

    Below is a description of the various tests we perform when flow testing your DI Injectors using our state of the art GD4R Flow Bench. We use two separate pieces of equipment. The GD4R Flow Test Machine is used to measure all the flow characteristics of your DI Injector and a seperate machine is used for ultrasonic cleaning. We will continuously clean each and every injector until it passes ALL TESTS with the GD4R and the injector meets OEM specifications as it would if the injector was new.

     
    R2LC - The R2LC Test is performance to check the impedance of the injector and make sure it is within OEM Specification

    • Electrical test for k/F, /H

    CFL - The CFL test is performed to test the injector for any fuel leakage both internally and externally while under pressure with the injector OFF.

    • Check For Leaks test (injector internal or external)

    NLT - The nozzle leakage test is performed to check that the injector doesn't leak fuel out for the nozzle tip while under pressure and injector is OFF. This test is done to see if you have what is stereotypically called "a leaking injector"

    • Nozzle Leakage Test @High Pressure

    iVM (FL, PL, EM, LL, PI) - The iVM test is performed under various conditions such as full load, part load, etc. and is used to verify that the injectors flow rate and charactersitcs are within OEM Tolerances under all known conditions.

    • Injector Volume Measuring test (full-load, part-load, emissions, low-load, pre/post-injection tests and more…)

    RSP - This test measures the fuel injector nozzle's response time (how long it takes for the nozzle to open when an electrical charge is applied) and that it meets OEM Spec.

    • Injector nozzle Response-time test

    SPR - This test is performed to ensure the injector's spray pattern has no abnormalities and that the shape of the spray pattern is how it should be when new.

    • Dynamic Spray test performed in all testing conditions

    ____________________________________________________________________________

    Features of our GD1R Test Bench:

    iPSC

    • Illuminated Pressurized spray chamber
    • View of injection pattern up to 1000Bar
    • Visually diagnose NOP, incorrect spraying, leaky / seized injectors

    RSP

    • Sensor adaptable to all nozzle types
    • Precise measurement of nozzle reaction time
    • Easily diagnose a slow acting injector, a retarded injection event, poor engine performance and emissions issues.

    Reports

    • Easy fail-track color report for each injector.
    • Single-page Quick report or Multi-page Analytic reporting

     Injection Services Apply to: 

    • Direct Injector
    • Port Fuel Injector

    Replace Filter with stainless Steel filter 

    ____________________________________________________________________________

    Important Notes Below on Purchasing Injector Services

    • *If purchasing cores, you will need to send in your set within 45 days after receiving your order
    • *Injector Cores have a 2-3 week lead time*
    • **SELECT A QUANTITY OF 4 FOR A FULL SET**
    • **New injector O Rings are needed after servicing your injectors**
    • **O Ring Kit for Ford does not include bottom Teflon seals**

     

     

    Special order.

    Special order